Why you should use Advance Networking in Azure Online Test?

The Advance Networking in Azure makes use of scenario-based questions to test for on-the-job skills as opposed to theoretical knowledge, ensuring that candidates who do well on this screening test have the relavant skills. The questions are designed to covered following on-the-job aspects: Konfiguration og styring af virtuelle netværk i Azure Implementering og fejlfinding af netværkssikkerhedsgrupper i Azure Brug af Azure Load Balancer til at distribuere indgående trafik Konfiguration og styring af undernet i Azure Arbejde med Azure Application Gateway for at optimere levering af webapplikationer Brug af Azure Traffic Manager til at forbedre multi-region-applikationsydelsen Konfiguration og styring af Azure VPN Gateway til sikker fjernforbindelse Forståelse og implementering af Azure ExpressRoute til private netværksforbindelser Konfiguration og styring af Azure DNS til domænenavnopløsning Implementering og styring af Azure Firewall for at beskytte netværksressourcer

Advance Networking in Azure Online Test

Q: What topics are covered in the Advance Networking in Azure Online Test?

Azure Networking Virtuelle netværk Undernet Netværkssikkerhedsgrupper Azure Load Balancer Azure Application Gateway Azure Traffic Manager Azure VPN Gateway Azure ExpressRoute Azure DNS Azure Firewall Azure Network Watcher

About the test:

Advance Networking in Azure Test evaluerer en kandidats viden og færdigheder i Azure -netværk. Den vurderer forståelsen af virtuelle netværk, undernet, netværkssikkerhedsgrupper, belastningsbalancering, applikationsgateways, trafikstyring, VPN -gateways, ExpressRoute, DNS, Firewall og Network Monitoring ved hjælp af Azure Network Watcher.

Covered skills:

Azure Networking
Undernet
Azure Load Balancer
Azure Traffic Manager
Azure ExpressRoute
Azure Firewall

Virtuelle netværk
Netværkssikkerhedsgrupper
Azure Application Gateway
Azure VPN Gateway
Azure DNS
Azure Network Watcher

Preview this test

Se prøvescorekort

9 reasons why

Adaface Advance Networking in Azure Test is the most accurate way to shortlist Azure Solutions Architects

Reason #1

Tests for on-the-job skills

The Advance Networking in Azure Online Test helps recruiters and hiring managers identify qualified candidates from a pool of resumes, and helps in taking objective hiring decisions. It reduces the administrative overhead of interviewing too many candidates and saves time by filtering out unqualified candidates at the first step of the hiring process.

The test screens for the following skills that hiring managers look for in candidates:

Evne til at designe og implementere virtuelle netværk i Azure
Evne til at konfigurere og administrere undernet i Azure
Evne til at definere og håndhæve netværkssikkerhed ved hjælp af netværkssikkerhedsgrupper
Evne til at konfigurere og administrere Azure Load Balancer
Evne til at konfigurere og administrere Azure Application Gateway
Evne til at konfigurere og administrere Azure Traffic Manager
Evne til at konfigurere og administrere Azure VPN Gateway
Evne til at konfigurere og styre Azure ExpressRoute
Evne til at konfigurere og styre Azure DNS
Evne til at konfigurere og administrere Azure Firewall
Evne til at overvåge og fejlfinde netværksydelse ved hjælp af Azure Network Watcher

Reason #2

No trick questions

Traditional assessment tools use trick questions and puzzles for the screening, which creates a lot of frustration among candidates about having to go through irrelevant screening assessments.

View sample questions

The main reason we started Adaface is that traditional pre-employment assessment platforms are not a fair way for companies to evaluate candidates. At Adaface, our mission is to help companies find great candidates by assessing on-the-job skills required for a role.

Why we started Adaface

Preview this test

Se prøvescorekort

Reason #3

Non-googleable questions

We have a very high focus on the quality of questions that test for on-the-job skills. Every question is non-googleable and we have a very high bar for the level of subject matter experts we onboard to create these questions. We have crawlers to check if any of the questions are leaked online. If/ when a question gets leaked, we get an alert. We change the question for you & let you know.

How we design questions

Dette er kun en lille prøve fra vores bibliotek med 10.000+ spørgsmål. De faktiske spørgsmål om dette Advance Networking in Azure vil være ikke-gåbart.

🧐 Question
Medium Backup and Restore Strategy Databases Backup Recovery	Solve
You are a database administrator for an organization that uses Azure SQL Database for its operations. The organization has a strict data retention policy and has set up the following backup strategy: 1. Full backups are taken every Sunday at midnight. 2. Differential backups are taken every day at midnight, excluding Sunday. 3. Transaction log backups are taken every hour on the hour. On Wednesday at 2:30 PM, a failure occurred, and the latest backup files available are: full backup from the previous Sunday, differential backups for Monday and Tuesday, and transaction log backups up to Wednesday 2 PM. In order to restore the database to the most recent point in time with the minimum amount of data loss, in what order should you restore the backups? A: Restore the full backup, then the differential backup for Tuesday, then the differential backup for Wednesday, then each transaction log backup from midnight on Wednesday to 2 PM on Wednesday. B: Restore the full backup, then the differential backup for Wednesday, then each transaction log backup from midnight on Wednesday to 2 PM on Wednesday. C: Restore the full backup, then each differential backup from Monday and Tuesday, then each transaction log backup from midnight on Wednesday to 2 PM on Wednesday. D: Restore the full backup, then the differential backup for Monday, then each transaction log backup from midnight on Monday to 2 PM on Wednesday. E: Restore the full backup, then the differential backup for Tuesday, then each transaction log backup from midnight on Tuesday to 2 PM on Wednesday.
Medium Resolving Connection Issues Virtual Machines Networking Security	Solve
You are an Azure Administrator and you manage a Linux VM running an internal web application in Azure. The web application communicates with a database server hosted on another VM in the same Virtual Network (VNet). Recently, users have reported that the web application is not accessible. After initial troubleshooting, you have identified that the web application VM is unable to establish a connection with the database server VM on port 5432. You have checked and confirmed the following: 1. Both VMs are up and running without any issues. 2. Both VMs are located in the same VNet and subnet. 3. Both VMs can successfully ping each other. 4. A Network Security Group (NSG) is associated with the subnet, and it has a rule allowing all outbound traffic from the web application VM. 5. The NSG rule for inbound traffic to the database VM on port 5432 has a higher priority than the default deny all rule. Given the information provided, what could be the most likely reason for the issue and the appropriate resolution? A: Add a route table to the subnet to enable communication between the VMs. B: The NSG rule priority for the inbound traffic to the database VM is not set correctly. Adjust the priority to be lower than the default rule. C: Check if a firewall is enabled on the database VM that might be blocking the port. If so, configure it to allow connections on port 5432. D: The issue is related to the DNS resolution. Update the DNS settings in the VNet to enable name resolution between the VMs. E: The web application is not correctly configured to connect to the database. Update the connection string in the web application configuration.
Medium Resolving NSG Configuration Issues Virtual Machines Security	Solve
You are an Azure Administrator in a software development company. A Linux VM is deployed on Azure, hosting an application server running on port 5000, set to start whenever the VM is booted up. The VM is associated with a Network Security Group (NSG) having the following inbound security rules: - Rule 100 (Priority: 100): Allow SSH (port 22) from any source - Rule 200 (Priority: 200): Allow HTTP (port 80) from any source - Rule 400 (Priority: 400): Allow TCP traffic on port 5000 from any source - Rule 300 (Priority: 300): Deny all inbound traffic from any source The outbound security rules are configured to allow all traffic to any destination. Internal users have been attempting to connect to the application server on port 5000 but they are consistently facing connection timeouts. You've confirmed the application server is up and running, and you can connect to the server locally on the VM. What is the most probable cause of the problem and how would you fix it? A: The inbound rule to allow TCP traffic on port 5000 is conflicting with the rule to allow HTTP on port 80. Remove Rule 200. B: Rule 300 to deny all inbound traffic is being processed before Rule 400 to allow traffic on port 5000. Modify the priority of Rule 400 to a value less than 300. C: The application server should be configured to listen on a well-known port instead of port 5000. Change the server settings. D: The NSG is missing an inbound rule to allow ICMP traffic. Add a new rule with a lower priority. E: The NSG needs to have an outbound rule specifically allowing traffic to port 5000. Add a new outbound rule.

	🧐 Question	🔧 Skill
	Medium Backup and Restore Strategy Databases Backup Recovery	2 mins Azure	Solve
You are a database administrator for an organization that uses Azure SQL Database for its operations. The organization has a strict data retention policy and has set up the following backup strategy: 1. Full backups are taken every Sunday at midnight. 2. Differential backups are taken every day at midnight, excluding Sunday. 3. Transaction log backups are taken every hour on the hour. On Wednesday at 2:30 PM, a failure occurred, and the latest backup files available are: full backup from the previous Sunday, differential backups for Monday and Tuesday, and transaction log backups up to Wednesday 2 PM. In order to restore the database to the most recent point in time with the minimum amount of data loss, in what order should you restore the backups? A: Restore the full backup, then the differential backup for Tuesday, then the differential backup for Wednesday, then each transaction log backup from midnight on Wednesday to 2 PM on Wednesday. B: Restore the full backup, then the differential backup for Wednesday, then each transaction log backup from midnight on Wednesday to 2 PM on Wednesday. C: Restore the full backup, then each differential backup from Monday and Tuesday, then each transaction log backup from midnight on Wednesday to 2 PM on Wednesday. D: Restore the full backup, then the differential backup for Monday, then each transaction log backup from midnight on Monday to 2 PM on Wednesday. E: Restore the full backup, then the differential backup for Tuesday, then each transaction log backup from midnight on Tuesday to 2 PM on Wednesday.
	Medium Resolving Connection Issues Virtual Machines Networking Security	2 mins Azure	Solve
You are an Azure Administrator and you manage a Linux VM running an internal web application in Azure. The web application communicates with a database server hosted on another VM in the same Virtual Network (VNet). Recently, users have reported that the web application is not accessible. After initial troubleshooting, you have identified that the web application VM is unable to establish a connection with the database server VM on port 5432. You have checked and confirmed the following: 1. Both VMs are up and running without any issues. 2. Both VMs are located in the same VNet and subnet. 3. Both VMs can successfully ping each other. 4. A Network Security Group (NSG) is associated with the subnet, and it has a rule allowing all outbound traffic from the web application VM. 5. The NSG rule for inbound traffic to the database VM on port 5432 has a higher priority than the default deny all rule. Given the information provided, what could be the most likely reason for the issue and the appropriate resolution? A: Add a route table to the subnet to enable communication between the VMs. B: The NSG rule priority for the inbound traffic to the database VM is not set correctly. Adjust the priority to be lower than the default rule. C: Check if a firewall is enabled on the database VM that might be blocking the port. If so, configure it to allow connections on port 5432. D: The issue is related to the DNS resolution. Update the DNS settings in the VNet to enable name resolution between the VMs. E: The web application is not correctly configured to connect to the database. Update the connection string in the web application configuration.
	Medium Resolving NSG Configuration Issues Virtual Machines Security	2 mins Azure	Solve
You are an Azure Administrator in a software development company. A Linux VM is deployed on Azure, hosting an application server running on port 5000, set to start whenever the VM is booted up. The VM is associated with a Network Security Group (NSG) having the following inbound security rules: - Rule 100 (Priority: 100): Allow SSH (port 22) from any source - Rule 200 (Priority: 200): Allow HTTP (port 80) from any source - Rule 400 (Priority: 400): Allow TCP traffic on port 5000 from any source - Rule 300 (Priority: 300): Deny all inbound traffic from any source The outbound security rules are configured to allow all traffic to any destination. Internal users have been attempting to connect to the application server on port 5000 but they are consistently facing connection timeouts. You've confirmed the application server is up and running, and you can connect to the server locally on the VM. What is the most probable cause of the problem and how would you fix it? A: The inbound rule to allow TCP traffic on port 5000 is conflicting with the rule to allow HTTP on port 80. Remove Rule 200. B: Rule 300 to deny all inbound traffic is being processed before Rule 400 to allow traffic on port 5000. Modify the priority of Rule 400 to a value less than 300. C: The application server should be configured to listen on a well-known port instead of port 5000. Change the server settings. D: The NSG is missing an inbound rule to allow ICMP traffic. Add a new rule with a lower priority. E: The NSG needs to have an outbound rule specifically allowing traffic to port 5000. Add a new outbound rule.

	🧐 Question	🔧 Skill	💪 Difficulty	⌛ Time
	Backup and Restore Strategy Databases Backup Recovery	Azure	Medium	2 mins	Solve
You are a database administrator for an organization that uses Azure SQL Database for its operations. The organization has a strict data retention policy and has set up the following backup strategy: 1. Full backups are taken every Sunday at midnight. 2. Differential backups are taken every day at midnight, excluding Sunday. 3. Transaction log backups are taken every hour on the hour. On Wednesday at 2:30 PM, a failure occurred, and the latest backup files available are: full backup from the previous Sunday, differential backups for Monday and Tuesday, and transaction log backups up to Wednesday 2 PM. In order to restore the database to the most recent point in time with the minimum amount of data loss, in what order should you restore the backups? A: Restore the full backup, then the differential backup for Tuesday, then the differential backup for Wednesday, then each transaction log backup from midnight on Wednesday to 2 PM on Wednesday. B: Restore the full backup, then the differential backup for Wednesday, then each transaction log backup from midnight on Wednesday to 2 PM on Wednesday. C: Restore the full backup, then each differential backup from Monday and Tuesday, then each transaction log backup from midnight on Wednesday to 2 PM on Wednesday. D: Restore the full backup, then the differential backup for Monday, then each transaction log backup from midnight on Monday to 2 PM on Wednesday. E: Restore the full backup, then the differential backup for Tuesday, then each transaction log backup from midnight on Tuesday to 2 PM on Wednesday.
	Resolving Connection Issues Virtual Machines Networking Security	Azure	Medium	2 mins	Solve
You are an Azure Administrator and you manage a Linux VM running an internal web application in Azure. The web application communicates with a database server hosted on another VM in the same Virtual Network (VNet). Recently, users have reported that the web application is not accessible. After initial troubleshooting, you have identified that the web application VM is unable to establish a connection with the database server VM on port 5432. You have checked and confirmed the following: 1. Both VMs are up and running without any issues. 2. Both VMs are located in the same VNet and subnet. 3. Both VMs can successfully ping each other. 4. A Network Security Group (NSG) is associated with the subnet, and it has a rule allowing all outbound traffic from the web application VM. 5. The NSG rule for inbound traffic to the database VM on port 5432 has a higher priority than the default deny all rule. Given the information provided, what could be the most likely reason for the issue and the appropriate resolution? A: Add a route table to the subnet to enable communication between the VMs. B: The NSG rule priority for the inbound traffic to the database VM is not set correctly. Adjust the priority to be lower than the default rule. C: Check if a firewall is enabled on the database VM that might be blocking the port. If so, configure it to allow connections on port 5432. D: The issue is related to the DNS resolution. Update the DNS settings in the VNet to enable name resolution between the VMs. E: The web application is not correctly configured to connect to the database. Update the connection string in the web application configuration.
	Resolving NSG Configuration Issues Virtual Machines Security	Azure	Medium	2 mins	Solve
You are an Azure Administrator in a software development company. A Linux VM is deployed on Azure, hosting an application server running on port 5000, set to start whenever the VM is booted up. The VM is associated with a Network Security Group (NSG) having the following inbound security rules: - Rule 100 (Priority: 100): Allow SSH (port 22) from any source - Rule 200 (Priority: 200): Allow HTTP (port 80) from any source - Rule 400 (Priority: 400): Allow TCP traffic on port 5000 from any source - Rule 300 (Priority: 300): Deny all inbound traffic from any source The outbound security rules are configured to allow all traffic to any destination. Internal users have been attempting to connect to the application server on port 5000 but they are consistently facing connection timeouts. You've confirmed the application server is up and running, and you can connect to the server locally on the VM. What is the most probable cause of the problem and how would you fix it? A: The inbound rule to allow TCP traffic on port 5000 is conflicting with the rule to allow HTTP on port 80. Remove Rule 200. B: Rule 300 to deny all inbound traffic is being processed before Rule 400 to allow traffic on port 5000. Modify the priority of Rule 400 to a value less than 300. C: The application server should be configured to listen on a well-known port instead of port 5000. Change the server settings. D: The NSG is missing an inbound rule to allow ICMP traffic. Add a new rule with a lower priority. E: The NSG needs to have an outbound rule specifically allowing traffic to port 5000. Add a new outbound rule.

Reason #4

1200+ customers in 75 countries

Med Adaface var vi i stand til at optimere vores indledende screeningsproces med op mod 75 %, hvilket frigjorde kostbar tid for både ansættelsesledere og vores talentanskaffelsesteam!

Brandon Lee, Leder af mennesker, Love, Bonito

Preview this test

Se prøvescorekort

Reason #5

Designed for elimination, not selection

The most important thing while implementing the pre-employment Advance Networking in Azure in your hiring process is that it is an elimination tool, not a selection tool. In other words: you want to use the test to eliminate the candidates who do poorly on the test, not to select the candidates who come out at the top. While they are super valuable, pre-employment tests do not paint the entire picture of a candidate’s abilities, knowledge, and motivations. Multiple easy questions are more predictive of a candidate's ability than fewer hard questions. Harder questions are often "trick" based questions, which do not provide any meaningful signal about the candidate's skillset.

Science behind Adaface tests

Reason #6

1 click candidate invites

Email invites: You can send candidates an email invite to the Advance Networking in Azure from your dashboard by entering their email address.

Public link: You can create a public link for each test that you can share with candidates.

API or integrations: You can invite candidates directly from your ATS by using our pre-built integrations with popular ATS systems or building a custom integration with your in-house ATS.

Reason #7

Detailed scorecards & benchmarks

Se prøvescorekort

Preview this test

Se prøvescorekort

Reason #8

High completion rate

Adaface tests are conversational, low-stress, and take just 25-40 mins to complete.

This is why Adaface has the highest test-completion rate (86%), which is more than 2x better than traditional assessments.

Reason #9

Advanced Proctoring

Learn more

Preview this test

Se prøvescorekort

About the Advance Networking in Azure Assessment Test

Why you should use Pre-employment Advance Networking in Azure Online Test?

The Advance Networking in Azure makes use of scenario-based questions to test for on-the-job skills as opposed to theoretical knowledge, ensuring that candidates who do well on this screening test have the relavant skills. The questions are designed to covered following on-the-job aspects:

Konfiguration og styring af virtuelle netværk i Azure
Implementering og fejlfinding af netværkssikkerhedsgrupper i Azure
Brug af Azure Load Balancer til at distribuere indgående trafik
Konfiguration og styring af undernet i Azure
Arbejde med Azure Application Gateway for at optimere levering af webapplikationer
Brug af Azure Traffic Manager til at forbedre multi-region-applikationsydelsen
Konfiguration og styring af Azure VPN Gateway til sikker fjernforbindelse
Forståelse og implementering af Azure ExpressRoute til private netværksforbindelser
Konfiguration og styring af Azure DNS til domænenavnopløsning
Implementering og styring af Azure Firewall for at beskytte netværksressourcer

Once the test is sent to a candidate, the candidate receives a link in email to take the test. For each candidate, you will receive a detailed report with skills breakdown and benchmarks to shortlist the top candidates from your pool.

What topics are covered in the Advance Networking in Azure Online Test?

Virtuelle netværk </H4> <p> Azure Virtual Networks giver en måde at logisk isolere og sikkert forbinde Azure -ressourcer. De fungerer som dit eget private netværk i skyen, så du kan kontrollere IP -adresseområder, undernet og sikkerhedspolitikker. Virtuelle netværk er grundlaget for at oprette multi-tier-applikationer og etablere kommunikation mellem ressourcer. </p> <h4> subnet
Undernet er en måde at opdele et virtuelt netværk i mindre adresserum. De giver dig mulighed for yderligere at segmentere og organisere ressourcer inden for et virtuelt netværk, hvilket giver kontrol over netværkstrafik og netværkssikkerhed. Undernet bruges til at gruppere lignende ressourcer eller isolere specifikke typer trafik.
netværkssikkerhedsgrupper
Azure Network Security Groups (NSGS) giver granulær netværkssikkerhedskontrol for Azure Resources. De fungerer som en grundlæggende form for firewall, så du kan definere indgående og udgående trafikregler baseret på protokoller, porte og kilde/destination IP -adresser. NSGS hjælper med at sikre virtuelle netværk og beskytte ressourcer mod uautoriseret adgang.
azure belastningsbalancer
azure belastningsbalancer er en trafikdistributionstjeneste, der distribuerer indgående netværkstrafik på tværs af flere ressourcer, såsom virtuel Maskiner, der er baseret på belastningsbalanceringsregler. Det hjælper med at forbedre tilgængeligheden og skalere applikationer ved jævnt at distribuere trafik og forhindre overbelastning på individuelle ressourcer.
Azure Application Gateway
Azure Application Gateway er en lag 7 Load Balancer, der leverer applikationsniveau Routing og belastningsbalanceringstjenester. Det kan bruges til at optimere og sikre webtrafik til dine applikationer ved at udføre opgaver som SSL-terminering, URL-baseret routing og cookie-baseret session-affinitet.
Azure Traffic Manager </H4> <p> Azure Traffic Manager er en DNS-baseret trafikbelastningsbalancer, der distribuerer indgående trafik på tværs af flere slutpunkter, såsom Azure Web Apps, baseret på routingmetoder. Det hjælper med at forbedre tilgængeligheden og ydelsen ved at dirigere brugere til det nærmeste eller sundeste slutpunkt baseret på deres geografiske placering eller præstationsmåling. </p> <h4> Azure VPN Gateway
Azure VPN Gateway er en virtuel netværk Gateway Det giver en sikker forbindelse mellem dit lokale netværk og azure virtuelle netværk. Det giver dig mulighed for at etablere et sted til sted eller punkt-til-sted VPN-tunnel, der udvider dit lokale netværk til Azure Cloud sikkert og privat.
azure ExpressRoute
Azure ExpressRoute er en privat tilslutningsmulighed, der giver dig mulighed for at etablere dedikerede forbindelser mellem dit lokale netværk og Azure-datacentre. Det giver en mere pålidelig forbindelse og lav latensforbindelse sammenlignet med en typisk internetbaseret forbindelse, hvilket muliggør hurtigere dataoverførsel og sømløs hybrid skyintegration.
azure DNS
azure DNS er en hosting service til DNS -domæner. Det giver dig mulighed for at administrere og løse domænenavne ved hjælp af de samme skalerbare og meget tilgængelige infrastrukturer, der driver Azure Cloud Services. Azure DNS giver højtydende, pålidelig og sikker DNS-opløsning til dine applikationer og tjenester.
azure firewall
azure firewall er en administreret netværkssikkerhedstjeneste, der giver en statlig firewall-as -En-service til Azure Virtual Networks. Det filtrerer netværkstrafik ved hjælp af applikations- og netværkslagsregler, så du kan definere finkornet adgangskontrol, routing og netværkssegmenteringspolitikker. Azure Firewall hjælper med at beskytte dine Azure -ressourcer mod uautoriseret adgang og trusler.
Azure Network Watcher
Azure Network Watcher er en overvågning og diagnostisk service, der giver indsigt i sundheden, ydeevne og Sikkerhed af azurblå virtuelle netværk. Det giver dig mulighed for at overvåge netværkstrafik, fejlfinde forbindelsesproblemer og få synlighed i netværkstopologi og målinger. Azure Network Watcher hjælper med at sikre pålidelighed og optimale ydelse af dine virtuelle netværk.
Full list of covered topics
The actual topics of the questions in the final test will depend on your job description and requirements. However, here's a list of topics you can expect the questions for Advance Networking in Azure to be based on.
Virtuelle netværk
Undernet
Netværkssikkerhedsgrupper
Azure Load Balancer
Azure Application Gateway
Azure Traffic Manager
Azure VPN Gateway
Azure ExpressRoute
Azure DNS
Azure Firewall
Azure Network Watcher
Vnet Peering
VNET-til-VNET-forbindelser
Hub og talte netværksarkitektur
Netværksadresseoversættelse (NAT)
Virtuelle netværksgateways
Virtuelle netværkstjeneste Slutpunkter
Azure Privat DNS
Azure DNS private zoner
Brugerdefinerede ruter
Azure VPN -klient
Azure ExpressRoute Direct
ExpressRoute Global Reach
Azure DNS -zoner
Virtual Wan
Trafikanalyse
Integration af sikkerhedscenter
Virtual Network Tap
Forbindelsesmonitor
IP Flow Bekræft
Næste hop
Pakkeoptagelse
Netværkspræstationsmonitor
Topologi
Diagnostik og fejlfinding
Link til virtuel maskine
Effektive sikkerhedsregler
Virtual Network Gateway Diagnostics
VNET Peering Diagnostics
DDoS -beskyttelse
IP -allokering
Azure Application Gateway Standard V2
Web Application Firewall (WAF)
Frontend IP -konfiguration
Backend puljer
URL -sti -baseret routing
URL -omskrivning
Multi-site lytter
Forbindelse dræning
Servernavn Indikation (SNI)
IP -begrænsninger
Cache
Omdirigering
Web Application Gateway Diagnostics
Azure Traffic Manager Endpoint Monitoring
Trafikvisning
Placeringsbaseret trafikfordeling
Brugerdefineret domænenavn
Azure hoveddørstjeneste
Azure VPN -godkendelse
P2S VPN
S2S VPN
Point-to-site konfigurationer
ExpressRoute sameksistens
ExpressRoute failover og redundans
Azure VPN -diagnostik
Azure ExpressRoute Diagnostics
Privat peering
Microsoft Peering
Offentlig peering
Border Gateway Protocol (BGP)
Routing domæner
Routing Præference
Forbedre netværksydelse med accelereret netværk
DNS -konfiguration
Virtuelle netværkslink
DNS og IP -adressering
Azure DNS Diagnostics
Azure Firewall -ansøgningsregler
Azure Firewall Network Rules
Nat og Pat
Azure Firewall Diagnostics
Trafikanalyseintegration
Azure firewall trussel intelligens
Applikationskontrol
IP -gruppe
Servicemærker
Azure Firewall Pricing
Forbindelsesindsigt
Ressourceovervågning
VPN Gateway Packet fanger
Effektive ruter
NSG Flow -logfiler
Forbindelse Fejlfinding
VPN Gateway Diagnostics
Diagnosticere og løse problemer
Azure DNS -prisfastsættelse
Azure Firewall Dynamic Threat Intelligence
Azure Monitor
Azure Network Insights
Azure Network Performance Monitor
Azure Network Topology
Azure Network IP Flow
Azure Monitor -logfiler
Azure Monitor Metrics

Preview this test

Se prøvescorekort

What roles can I use the Advance Networking in Azure Online Test for?

Azure Solutions Architect
Cloud Infrastructure Engineer
Netværksingeniør
Systemadministrator
DevOps Engineer
Netværkssikkerhedsingeniør
Cloud Operations Engineer
Azure Cloud Consultant
Cloud Network Engineer
Cloud Solutions Architect

How is the Advance Networking in Azure Online Test customized for senior candidates?

For intermediate/ experienced candidates, we customize the assessment questions to include advanced topics and increase the difficulty level of the questions. This might include adding questions on topics like

Overvågning og fejlfinding af netværkstrafik ved hjælp af Azure Network Watcher
Implementering af netværksredundans og høj tilgængelighed i Azure
Brug af Azure hoveddør til at fremskynde globale applikationer
Implementering og styring af Azure Virtual WAN for forenklet netværksforbindelse
Konfiguration og styring af Azure Bastion til sikker fjernadgang til virtuelle maskiner
Implementering af Azure Private Link for sikkert at få adgang til Azure Services over et privat netværk
Konfiguration og styring af Azure Traffic Manager -profiler og slutpunkter
Forståelse og implementering af Azure ExpressRoute Peering -konfigurationer
Brug af Azure Firewall -applikation FQDN -tags til applikationsfiltrering
Fejlfinding af netværksforbindelsesproblemer i Azure

Preview this test

Se prøvescorekort

Ansættelseslederne mente, at de gennem de tekniske spørgsmål, som de stillede under panelinterviewene, var i stand til at fortælle, hvilke kandidater der havde bedre score og differentieret med dem, der ikke scorede så godt. De er meget tilfreds med kvaliteten af de kandidater, der er nomineret med Adaface-screeningen.

85%

Reduktion i screeningstid

Se den fulde casestudie

Advance Networking in Azure Hiring Test Ofte stillede spørgsmål

Kan jeg kombinere flere færdigheder i en brugerdefineret vurdering?

Ja absolut. Brugerdefinerede vurderinger er oprettet baseret på din jobbeskrivelse og vil omfatte spørgsmål om alle must-have-færdigheder, du angiver.

Har du nogen anti-cheating eller proctoring-funktioner på plads?

Vi har følgende anti-cheating-funktioner på plads:

Ikke-gåbare spørgsmål
IP Proctoring
Webproctoring
Webcam Proctoring
Detektion af plagiering
Sikker browser

Læs mere om Proctoring Features.

Hvordan fortolker jeg testresultater?

Den primære ting at huske på er, at en vurdering er et elimineringsværktøj, ikke et udvælgelsesværktøj. En færdighedsvurdering er optimeret for at hjælpe dig med at eliminere kandidater, der ikke er teknisk kvalificerede til rollen, den er ikke optimeret til at hjælpe dig med at finde den bedste kandidat til rollen. Så den ideelle måde at bruge en vurdering på er at beslutte en tærskelværdi (typisk 55%, vi hjælper dig med benchmark) og inviterer alle kandidater, der scorer over tærsklen for de næste interviewrunder.

Hvilken oplevelsesniveau kan jeg bruge denne test til?

Hver Adaface -vurdering tilpasses til din jobbeskrivelse/ ideel kandidatperson (vores emneeksperter vælger de rigtige spørgsmål til din vurdering fra vores bibliotek på 10000+ spørgsmål). Denne vurdering kan tilpasses til ethvert erfaringsniveau.

Får hver kandidat de samme spørgsmål?

Ja, det gør det meget lettere for dig at sammenligne kandidater. Valgmuligheder for MCQ -spørgsmål og rækkefølgen af spørgsmål randomiseres. Vi har anti-cheating/proctoring funktioner på plads. I vores virksomhedsplan har vi også muligheden for at oprette flere versioner af den samme vurdering med spørgsmål om lignende vanskelighedsniveauer.