Why you should use Advance Networking in Azure Online Test?

The Forhåndsnettverk i Azure makes use of scenario-based questions to test for on-the-job skills as opposed to theoretical knowledge, ensuring that candidates who do well on this screening test have the relavant skills. The questions are designed to covered following on-the-job aspects: Konfigurere og administrere virtuelle nettverk i Azure Implementering og feilsøking av nettverkssikkerhetsgrupper i Azure Bruke Azure Load Balancer for å distribuere innkommende trafikk Konfigurere og administrere undernett i Azure Arbeider med Azure Application Gateway for å optimalisere levering av webapplikasjoner Bruke Azure Traffic Manager for å forbedre applikasjonsytelsen med flere regioner Konfigurere og administrere Azure VPN Gateway for sikker fjernkobling Forstå og implementere Azure Expressroute for private nettverkstilkoblinger Konfigurere og administrere Azure DNS for oppløsning av domenenavn Implementere og administrere Azure Firewall for å beskytte nettverksressurser

Advance Networking in Azure Online Test

Q: What topics are covered in the Advance Networking in Azure Online Test?

Azure nettverk Virtuelle nettverk Undernett Nettverkssikkerhetsgrupper Azure Load Balancer Azure Application Gateway Azure Traffic Manager Azure VPN Gateway Azure Expressroute Azure DNS Azure brannmur Azure Network Watcher

About the test:

Advance Networking in Azure Test evaluerer en kandidats kunnskap og ferdigheter i Azure Networking. Den vurderer forståelse av virtuelle nettverk, undernett, nettverkssikkerhetsgrupper, belastningsbalansering, applikasjonsgateways, trafikkstyring, VPN -gateways, ExpressRoute, DNS, brannmur og nettverksovervåking ved bruk av Azure Network Watcher.

Covered skills:

Azure nettverk
Undernett
Azure Load Balancer
Azure Traffic Manager
Azure Expressroute
Azure brannmur

Virtuelle nettverk
Nettverkssikkerhetsgrupper
Azure Application Gateway
Azure VPN Gateway
Azure DNS
Azure Network Watcher

Try practice test

Start 14-day free trial

9 reasons why

Adaface Advance Networking in Azure Test is the most accurate way to shortlist Azure Solutions Architects

Reason #1

Tests for on-the-job skills

The Advance Networking in Azure Online Test helps recruiters and hiring managers identify qualified candidates from a pool of resumes, and helps in taking objective hiring decisions. It reduces the administrative overhead of interviewing too many candidates and saves time by filtering out unqualified candidates at the first step of the hiring process.

The test screens for the following skills that hiring managers look for in candidates:

Evne til å designe og implementere virtuelle nettverk i Azure
Evne til å konfigurere og administrere undernett i Azure
Evne til å definere og håndheve nettverkssikkerhet ved hjelp av nettverkssikkerhetsgrupper
Evne til å konfigurere og administrere Azure Load Balancer
Evne til å konfigurere og administrere Azure Application Gateway
Evne til å konfigurere og administrere Azure Traffic Manager
Evne til å konfigurere og administrere Azure VPN Gateway
Evne til å konfigurere og administrere Azure Expressroute
Evne til å konfigurere og administrere Azure DNS
Evne til å konfigurere og administrere Azure Firewall
Evne til å overvåke og feilsøke nettverksytelse ved hjelp av Azure Network Watcher

Reason #2

No trick questions

Traditional assessment tools use trick questions and puzzles for the screening, which creates a lot of frustration among candidates about having to go through irrelevant screening assessments.

View sample questions

The main reason we started Adaface is that traditional pre-employment assessment platforms are not a fair way for companies to evaluate candidates. At Adaface, our mission is to help companies find great candidates by assessing on-the-job skills required for a role.

Why we started Adaface

Try practice test

Start 14-day free trial

Reason #3

Non-googleable questions

We have a very high focus on the quality of questions that test for on-the-job skills. Every question is non-googleable and we have a very high bar for the level of subject matter experts we onboard to create these questions. We have crawlers to check if any of the questions are leaked online. If/ when a question gets leaked, we get an alert. We change the question for you & let you know.

How we design questions

Dette er bare en liten prøve fra biblioteket vårt med 10.000+ spørsmål. De faktiske spørsmålene om dette Forhåndsnettverk i Azure vil være ikke-googlable.

🧐 Question
Medium Backup and Restore Strategy Databases Backup Recovery	Try practice test
You are a database administrator for an organization that uses Azure SQL Database for its operations. The organization has a strict data retention policy and has set up the following backup strategy: 1. Full backups are taken every Sunday at midnight. 2. Differential backups are taken every day at midnight, excluding Sunday. 3. Transaction log backups are taken every hour on the hour. On Wednesday at 2:30 PM, a failure occurred, and the latest backup files available are: full backup from the previous Sunday, differential backups for Monday and Tuesday, and transaction log backups up to Wednesday 2 PM. In order to restore the database to the most recent point in time with the minimum amount of data loss, in what order should you restore the backups? A: Restore the full backup, then the differential backup for Tuesday, then the differential backup for Wednesday, then each transaction log backup from midnight on Wednesday to 2 PM on Wednesday. B: Restore the full backup, then the differential backup for Wednesday, then each transaction log backup from midnight on Wednesday to 2 PM on Wednesday. C: Restore the full backup, then each differential backup from Monday and Tuesday, then each transaction log backup from midnight on Wednesday to 2 PM on Wednesday. D: Restore the full backup, then the differential backup for Monday, then each transaction log backup from midnight on Monday to 2 PM on Wednesday. E: Restore the full backup, then the differential backup for Tuesday, then each transaction log backup from midnight on Tuesday to 2 PM on Wednesday.
Medium Resolving Connection Issues Virtual Machines Networking Security	Try practice test
You are an Azure Administrator and you manage a Linux VM running an internal web application in Azure. The web application communicates with a database server hosted on another VM in the same Virtual Network (VNet). Recently, users have reported that the web application is not accessible. After initial troubleshooting, you have identified that the web application VM is unable to establish a connection with the database server VM on port 5432. You have checked and confirmed the following: 1. Both VMs are up and running without any issues. 2. Both VMs are located in the same VNet and subnet. 3. Both VMs can successfully ping each other. 4. A Network Security Group (NSG) is associated with the subnet, and it has a rule allowing all outbound traffic from the web application VM. 5. The NSG rule for inbound traffic to the database VM on port 5432 has a higher priority than the default deny all rule. Given the information provided, what could be the most likely reason for the issue and the appropriate resolution? A: Add a route table to the subnet to enable communication between the VMs. B: The NSG rule priority for the inbound traffic to the database VM is not set correctly. Adjust the priority to be lower than the default rule. C: Check if a firewall is enabled on the database VM that might be blocking the port. If so, configure it to allow connections on port 5432. D: The issue is related to the DNS resolution. Update the DNS settings in the VNet to enable name resolution between the VMs. E: The web application is not correctly configured to connect to the database. Update the connection string in the web application configuration.
Medium Resolving NSG Configuration Issues Virtual Machines Security	Try practice test
You are an Azure Administrator in a software development company. A Linux VM is deployed on Azure, hosting an application server running on port 5000, set to start whenever the VM is booted up. The VM is associated with a Network Security Group (NSG) having the following inbound security rules: - Rule 100 (Priority: 100): Allow SSH (port 22) from any source - Rule 200 (Priority: 200): Allow HTTP (port 80) from any source - Rule 400 (Priority: 400): Allow TCP traffic on port 5000 from any source - Rule 300 (Priority: 300): Deny all inbound traffic from any source The outbound security rules are configured to allow all traffic to any destination. Internal users have been attempting to connect to the application server on port 5000 but they are consistently facing connection timeouts. You've confirmed the application server is up and running, and you can connect to the server locally on the VM. What is the most probable cause of the problem and how would you fix it? A: The inbound rule to allow TCP traffic on port 5000 is conflicting with the rule to allow HTTP on port 80. Remove Rule 200. B: Rule 300 to deny all inbound traffic is being processed before Rule 400 to allow traffic on port 5000. Modify the priority of Rule 400 to a value less than 300. C: The application server should be configured to listen on a well-known port instead of port 5000. Change the server settings. D: The NSG is missing an inbound rule to allow ICMP traffic. Add a new rule with a lower priority. E: The NSG needs to have an outbound rule specifically allowing traffic to port 5000. Add a new outbound rule.

	🧐 Question	🔧 Skill
	Medium Backup and Restore Strategy Databases Backup Recovery	2 mins Azure	Try practice test
You are a database administrator for an organization that uses Azure SQL Database for its operations. The organization has a strict data retention policy and has set up the following backup strategy: 1. Full backups are taken every Sunday at midnight. 2. Differential backups are taken every day at midnight, excluding Sunday. 3. Transaction log backups are taken every hour on the hour. On Wednesday at 2:30 PM, a failure occurred, and the latest backup files available are: full backup from the previous Sunday, differential backups for Monday and Tuesday, and transaction log backups up to Wednesday 2 PM. In order to restore the database to the most recent point in time with the minimum amount of data loss, in what order should you restore the backups? A: Restore the full backup, then the differential backup for Tuesday, then the differential backup for Wednesday, then each transaction log backup from midnight on Wednesday to 2 PM on Wednesday. B: Restore the full backup, then the differential backup for Wednesday, then each transaction log backup from midnight on Wednesday to 2 PM on Wednesday. C: Restore the full backup, then each differential backup from Monday and Tuesday, then each transaction log backup from midnight on Wednesday to 2 PM on Wednesday. D: Restore the full backup, then the differential backup for Monday, then each transaction log backup from midnight on Monday to 2 PM on Wednesday. E: Restore the full backup, then the differential backup for Tuesday, then each transaction log backup from midnight on Tuesday to 2 PM on Wednesday.
	Medium Resolving Connection Issues Virtual Machines Networking Security	2 mins Azure	Try practice test
You are an Azure Administrator and you manage a Linux VM running an internal web application in Azure. The web application communicates with a database server hosted on another VM in the same Virtual Network (VNet). Recently, users have reported that the web application is not accessible. After initial troubleshooting, you have identified that the web application VM is unable to establish a connection with the database server VM on port 5432. You have checked and confirmed the following: 1. Both VMs are up and running without any issues. 2. Both VMs are located in the same VNet and subnet. 3. Both VMs can successfully ping each other. 4. A Network Security Group (NSG) is associated with the subnet, and it has a rule allowing all outbound traffic from the web application VM. 5. The NSG rule for inbound traffic to the database VM on port 5432 has a higher priority than the default deny all rule. Given the information provided, what could be the most likely reason for the issue and the appropriate resolution? A: Add a route table to the subnet to enable communication between the VMs. B: The NSG rule priority for the inbound traffic to the database VM is not set correctly. Adjust the priority to be lower than the default rule. C: Check if a firewall is enabled on the database VM that might be blocking the port. If so, configure it to allow connections on port 5432. D: The issue is related to the DNS resolution. Update the DNS settings in the VNet to enable name resolution between the VMs. E: The web application is not correctly configured to connect to the database. Update the connection string in the web application configuration.
	Medium Resolving NSG Configuration Issues Virtual Machines Security	2 mins Azure	Try practice test
You are an Azure Administrator in a software development company. A Linux VM is deployed on Azure, hosting an application server running on port 5000, set to start whenever the VM is booted up. The VM is associated with a Network Security Group (NSG) having the following inbound security rules: - Rule 100 (Priority: 100): Allow SSH (port 22) from any source - Rule 200 (Priority: 200): Allow HTTP (port 80) from any source - Rule 400 (Priority: 400): Allow TCP traffic on port 5000 from any source - Rule 300 (Priority: 300): Deny all inbound traffic from any source The outbound security rules are configured to allow all traffic to any destination. Internal users have been attempting to connect to the application server on port 5000 but they are consistently facing connection timeouts. You've confirmed the application server is up and running, and you can connect to the server locally on the VM. What is the most probable cause of the problem and how would you fix it? A: The inbound rule to allow TCP traffic on port 5000 is conflicting with the rule to allow HTTP on port 80. Remove Rule 200. B: Rule 300 to deny all inbound traffic is being processed before Rule 400 to allow traffic on port 5000. Modify the priority of Rule 400 to a value less than 300. C: The application server should be configured to listen on a well-known port instead of port 5000. Change the server settings. D: The NSG is missing an inbound rule to allow ICMP traffic. Add a new rule with a lower priority. E: The NSG needs to have an outbound rule specifically allowing traffic to port 5000. Add a new outbound rule.

	🧐 Question	🔧 Skill	💪 Difficulty	⌛ Time
	Backup and Restore Strategy Databases Backup Recovery	Azure	Medium	2 mins	Try practice test
You are a database administrator for an organization that uses Azure SQL Database for its operations. The organization has a strict data retention policy and has set up the following backup strategy: 1. Full backups are taken every Sunday at midnight. 2. Differential backups are taken every day at midnight, excluding Sunday. 3. Transaction log backups are taken every hour on the hour. On Wednesday at 2:30 PM, a failure occurred, and the latest backup files available are: full backup from the previous Sunday, differential backups for Monday and Tuesday, and transaction log backups up to Wednesday 2 PM. In order to restore the database to the most recent point in time with the minimum amount of data loss, in what order should you restore the backups? A: Restore the full backup, then the differential backup for Tuesday, then the differential backup for Wednesday, then each transaction log backup from midnight on Wednesday to 2 PM on Wednesday. B: Restore the full backup, then the differential backup for Wednesday, then each transaction log backup from midnight on Wednesday to 2 PM on Wednesday. C: Restore the full backup, then each differential backup from Monday and Tuesday, then each transaction log backup from midnight on Wednesday to 2 PM on Wednesday. D: Restore the full backup, then the differential backup for Monday, then each transaction log backup from midnight on Monday to 2 PM on Wednesday. E: Restore the full backup, then the differential backup for Tuesday, then each transaction log backup from midnight on Tuesday to 2 PM on Wednesday.
	Resolving Connection Issues Virtual Machines Networking Security	Azure	Medium	2 mins	Try practice test
You are an Azure Administrator and you manage a Linux VM running an internal web application in Azure. The web application communicates with a database server hosted on another VM in the same Virtual Network (VNet). Recently, users have reported that the web application is not accessible. After initial troubleshooting, you have identified that the web application VM is unable to establish a connection with the database server VM on port 5432. You have checked and confirmed the following: 1. Both VMs are up and running without any issues. 2. Both VMs are located in the same VNet and subnet. 3. Both VMs can successfully ping each other. 4. A Network Security Group (NSG) is associated with the subnet, and it has a rule allowing all outbound traffic from the web application VM. 5. The NSG rule for inbound traffic to the database VM on port 5432 has a higher priority than the default deny all rule. Given the information provided, what could be the most likely reason for the issue and the appropriate resolution? A: Add a route table to the subnet to enable communication between the VMs. B: The NSG rule priority for the inbound traffic to the database VM is not set correctly. Adjust the priority to be lower than the default rule. C: Check if a firewall is enabled on the database VM that might be blocking the port. If so, configure it to allow connections on port 5432. D: The issue is related to the DNS resolution. Update the DNS settings in the VNet to enable name resolution between the VMs. E: The web application is not correctly configured to connect to the database. Update the connection string in the web application configuration.
	Resolving NSG Configuration Issues Virtual Machines Security	Azure	Medium	2 mins	Try practice test
You are an Azure Administrator in a software development company. A Linux VM is deployed on Azure, hosting an application server running on port 5000, set to start whenever the VM is booted up. The VM is associated with a Network Security Group (NSG) having the following inbound security rules: - Rule 100 (Priority: 100): Allow SSH (port 22) from any source - Rule 200 (Priority: 200): Allow HTTP (port 80) from any source - Rule 400 (Priority: 400): Allow TCP traffic on port 5000 from any source - Rule 300 (Priority: 300): Deny all inbound traffic from any source The outbound security rules are configured to allow all traffic to any destination. Internal users have been attempting to connect to the application server on port 5000 but they are consistently facing connection timeouts. You've confirmed the application server is up and running, and you can connect to the server locally on the VM. What is the most probable cause of the problem and how would you fix it? A: The inbound rule to allow TCP traffic on port 5000 is conflicting with the rule to allow HTTP on port 80. Remove Rule 200. B: Rule 300 to deny all inbound traffic is being processed before Rule 400 to allow traffic on port 5000. Modify the priority of Rule 400 to a value less than 300. C: The application server should be configured to listen on a well-known port instead of port 5000. Change the server settings. D: The NSG is missing an inbound rule to allow ICMP traffic. Add a new rule with a lower priority. E: The NSG needs to have an outbound rule specifically allowing traffic to port 5000. Add a new outbound rule.

Reason #4

1200+ customers in 75 countries

Med Adaface var vi i stand til å optimalisere den første screeningsprosessen vår med oppover 75 %, og frigjorde dyrebar tid for både ansettelsesledere og vårt talentanskaffelsesteam!

Brandon Lee, Leder for mennesker, Love, Bonito

Try practice test

Start 14-day free trial

Reason #5

Designed for elimination, not selection

The most important thing while implementing the pre-employment Forhåndsnettverk i Azure in your hiring process is that it is an elimination tool, not a selection tool. In other words: you want to use the test to eliminate the candidates who do poorly on the test, not to select the candidates who come out at the top. While they are super valuable, pre-employment tests do not paint the entire picture of a candidate’s abilities, knowledge, and motivations. Multiple easy questions are more predictive of a candidate's ability than fewer hard questions. Harder questions are often "trick" based questions, which do not provide any meaningful signal about the candidate's skillset.

Science behind Adaface tests

Reason #6

1 click candidate invites

Email invites: You can send candidates an email invite to the Forhåndsnettverk i Azure from your dashboard by entering their email address.

Public link: You can create a public link for each test that you can share with candidates.

API or integrations: You can invite candidates directly from your ATS by using our pre-built integrations with popular ATS systems or building a custom integration with your in-house ATS.

Reason #7

Detailed scorecards & benchmarks

Vis eksempler på scorecard

Try practice test

Start 14-day free trial

Reason #8

High completion rate

Adaface tests are conversational, low-stress, and take just 25-40 mins to complete.

This is why Adaface has the highest test-completion rate (86%), which is more than 2x better than traditional assessments.

Reason #9

Advanced Proctoring

Learn more

Preview this test

Vis eksempler på scorecard

About the Advance Networking in Azure Assessment Test

Why you should use Pre-employment Advance Networking in Azure Online Test?

The Forhåndsnettverk i Azure makes use of scenario-based questions to test for on-the-job skills as opposed to theoretical knowledge, ensuring that candidates who do well on this screening test have the relavant skills. The questions are designed to covered following on-the-job aspects:

Konfigurere og administrere virtuelle nettverk i Azure
Implementering og feilsøking av nettverkssikkerhetsgrupper i Azure
Bruke Azure Load Balancer for å distribuere innkommende trafikk
Konfigurere og administrere undernett i Azure
Arbeider med Azure Application Gateway for å optimalisere levering av webapplikasjoner
Bruke Azure Traffic Manager for å forbedre applikasjonsytelsen med flere regioner
Konfigurere og administrere Azure VPN Gateway for sikker fjernkobling
Forstå og implementere Azure Expressroute for private nettverkstilkoblinger
Konfigurere og administrere Azure DNS for oppløsning av domenenavn
Implementere og administrere Azure Firewall for å beskytte nettverksressurser

Once the test is sent to a candidate, the candidate receives a link in email to take the test. For each candidate, you will receive a detailed report with skills breakdown and benchmarks to shortlist the top candidates from your pool.

What topics are covered in the Advance Networking in Azure Online Test?

Azure nettverk
Azure Networking refererer til innsamling av tjenester i Azure som gjør det mulig å opprette og styring av virtuelle nettverk, slik at brukerne kan koble til og isolere sine Azure -ressurser sikkert. Den inkluderer funksjoner som virtuelt nettverks peering, nettverkssikkerhetsgrupper og virtuelle nettverksgateways.
Virtuelle nettverk
Azure Virtual Networks gir en måte å logisk isolere og koble til Azure -ressurser. De fungerer som ditt eget private nettverk i skyen, slik at du kan kontrollere IP -adresserier, undernett og sikkerhetspolicyer. Virtuelle nettverk er grunnlaget for å lage multi-tier-applikasjoner og etablere kommunikasjon mellom ressurser.
undernett
undernett er en måte å dele opp et virtuelt nettverk i mindre adresseområder. De lar deg videre segmentere og organisere ressurser i et virtuelt nettverk, og gir kontroll over nettverkstrafikk og nettverkssikkerhet. Undernett brukes til å gruppere lignende ressurser eller isolere spesifikke trafikktyper.
Nettverkssikkerhetsgrupper
Azure Network Security Groups (NSGS) gir granulær nettverkssikkerhetskontroll for Azure -ressurser. De fungerer som en grunnleggende form for brannmur, slik at du kan definere innkommende og utgående trafikkregler basert på protokoller, porter og IP -adresser for kilde/destinasjon. NSG -er hjelper til med å sikre virtuelle nettverk og beskytte ressurser mot uautorisert tilgang.
Azure Load Balancer
Azure Load Balancer er en trafikkdistribusjonstjeneste som distribuerer innkommende nettverkstrafikk over flere ressurser, for eksempel virtuell Maskiner, basert på belastningsbalanseringsregler. Det hjelper til Ruting og lastbalanseringstjenester. Det kan brukes til å optimalisere og sikre netttrafikk til applikasjonene dine ved å utføre oppgaver som SSL-avslutning, URL-basert ruting og kakebasert sesjonsaffinitet.
Azure Traffic Manager
Azure Traffic Manager er en DNS-basert trafikkbelastningsbalanse som distribuerer innkommende trafikk over flere endepunkter, for eksempel Azure Web Apps, basert på rutingsmetoder. Det hjelper til Det gir en sikker forbindelse mellom ditt lokale nettverk og virtuelle nettverk. Det lar deg etablere en VPN-tunnel på stedet eller punkt til nettsted, og utvide ditt lokale nettverk til Azure Cloud sikkert og privat.
Azure ExpressRoute
Azure Expressroute er et privat tilkoblingsalternativ som lar deg etablere dedikerte forbindelser mellom ditt lokale nettverk og Azure datasentre. Det gir en mer pålitelig og lav latensforbindelse sammenlignet med en typisk internettbasert forbindelse, noe som muliggjør raskere dataoverføring og sømløs hybrid skyintegrasjon.
Azure DNS
Azure DNS er en hosting Service for DNS -domener. Den lar deg administrere og løse domenenavn ved å bruke den samme skalerbare og svært tilgjengelige infrastrukturen som driver Azure Cloud Services. Azure DNS gir høy ytelse, pålitelig og sikker DNS-oppløsning for dine applikasjoner og tjenester.
Azure Firewall
Azure Firewall er en administrert nettverkssikkerhetstjeneste som tilbyr en statlig brannmur-as -En-tjeneste for Azure virtuelle nettverk. Den filtrerer nettverkstrafikk ved bruk av applikasjons- og nettverkslagregler, slik at du kan definere finkornet tilgangskontroll, ruting og nettverkssegmenteringspolicy. Azure Firewall hjelper til med å beskytte Azure -ressursene dine mot uautorisert tilgang og trusler.
Azure Network Watcher
Azure Network Watcher er en overvåking og diagnostisk tjeneste som gir innsikt i helse, ytelse og og Sikkerhet for Azure virtuelle nettverk. Det lar deg overvåke nettverkstrafikk, feilsøke tilkoblingsproblemer og få synlighet i nettverkstopologi og beregninger. Azure Network Watcher hjelper til med å sikre påliteligheten og den optimale ytelsen til dine virtuelle nettverk.
Full list of covered topics
The actual topics of the questions in the final test will depend on your job description and requirements. However, here's a list of topics you can expect the questions for Forhåndsnettverk i Azure to be based on.
Virtuelle nettverk
Undernett
Nettverkssikkerhetsgrupper
Azure Load Balancer
Azure Application Gateway
Azure Traffic Manager
Azure VPN Gateway
Azure Expressroute
Azure DNS
Azure brannmur
Azure Network Watcher
VNET Peering
VNET-til-VNET-tilkoblinger
Hub og snakket nettverksarkitektur
Nettverksadresseoversettelse (NAT)
Virtuelle nettverksgateways
Endepunkter for virtuelle nettverkstjenester
Azure Private DNS
Azure DNS private soner
Brukerdefinerte ruter
Azure VPN -klient
Azure Expressroute Direct
ExpressRoute Global Reach
Azure DNS -soner
Virtual Wan
Trafikkanalyse
Sikkerhetssenterintegrasjon
Virtual Network Tap
Tilkoblingsmonitor
Ip flow bekreft
Neste hopp
Pakkefangst
Nettverksytelsesmonitor
Topologi
Diagnostikk og feilsøking
Lenke til virtuell maskin
Effektive sikkerhetsregler
Virtual Network Gateway Diagnostics
VNET Peering Diagnostics
DDoS -beskyttelse
IP -tildeling
Azure Application Gateway Standard V2
Nettapplikasjonsbrannmur (WAF)
Frontend IP -konfigurasjon
Backend Pools
URL -banebasert ruting
URL -omskriving
Multi-site lytter
Tilkobling drenering
Servernavnsindikasjon (SNI)
IP -begrensninger
Hurtigbufring
Omdirigering
Nettapplikasjon Gateway Diagnostics
Azure Traffic Manager Endpoint Monitoring
Trafikkvisning
Stedsbasert trafikkdistribusjon
Tilpasset domenenavn
Azure inngangsdørstjeneste
Azure VPN -godkjenning
P2S VPN
S2S VPN
Konfigurasjoner av punkt-til-sted
ExpressRoute sameksistens
Expressroute failover og redundans
Azure VPN Diagnostics
Azure Expressroute Diagnostics
Privat peering
Microsoft Peering
Offentlig peering
Border Gateway Protocol (BGP)
Ruting domener
Ruting preferanse
Forbedre nettverksytelsen med akselerert nettverk
DNS -konfigurasjon
Virtuelle nettverkskoblinger
DNS og IP -adressering
Azure DNS Diagnostics
Azure brannmurs søknadsregler
Azure brannmurnettverksregler
Nat og Pat
Azure Firewall Diagnostics
Trafikkanalyseintegrasjon
Azure Firewall Threat Intelligence
Applikasjonskontroll
IP -gruppe
Servicekoder
Azure brannmurpriser
Tilkoblingsinnsikt
Ressursovervåking
VPN Gateway -pakkefanger
Effektive ruter
NSG flytlogger
Feilsøking av tilkobling
VPN Gateway Diagnostics
Diagnostisere og løse problemer
Azure DNS -priser
Azure Firewall Dynamic Threat Intelligence
Azure Monitor
Azure nettverksinnsikt
Azure Network Performance Monitor
Azure nettverkstopologi
Azure Network IP Flow
Azure Monitor -logger
Azure Monitor -beregninger

Try practice test

Start 14-day free trial

What roles can I use the Advance Networking in Azure Online Test for?

Azure Solutions Architect
Cloud Infrastructure Engineer
Nettverksingeniør
Systemadministrator
DevOps ingeniør
Nettverkssikkerhetsingeniør
Cloud Operations Engineer
Azure Cloud Consultant
Cloud Network Engineer
Cloud Solutions Architect

How is the Advance Networking in Azure Online Test customized for senior candidates?

For intermediate/ experienced candidates, we customize the assessment questions to include advanced topics and increase the difficulty level of the questions. This might include adding questions on topics like

Overvåking og feilsøking av nettverkstrafikk ved hjelp av Azure Network Watcher
Implementering av nettverksredundans og høy tilgjengelighet i Azure
Bruke Azure inngangsdør for å akselerere globale applikasjoner
Distribuere og administrere Azure Virtual WAN for forenklet nettverkstilkobling
Konfigurere og administrere Azure Bastion for sikker fjerntilgang til virtuelle maskiner
Implementering av Azure Private Link for å få tilgang til Azure Services over et privat nettverk sikkert
Konfigurere og administrere Azure Traffic Manager -profiler og endepunkter
Forstå og implementere Azure Expressroute Peering Configurations
Bruke Azure Firewall -applikasjon FQDN -tagger for applikasjonsfiltrering
Feilsøking av nettverkstilkoblingsproblemer i Azure

Preview this test

Vis eksempler på scorecard

Ansettelseslederne mente at de gjennom de tekniske spørsmålene de stilte under panelintervjuene, var i stand til å fortelle hvilke kandidater som scoret bedre, og differensierte med de som ikke skåret like godt. De er svært fornøyd med kvaliteten på kandidatene som er på listen med Adaface-screeningen.

85%

Reduksjon i screeningstid

Se hele casestudien

Advance Networking in Azure Hiring Test Vanlige spørsmål

Kan jeg kombinere flere ferdigheter til en tilpasset vurdering?

Ja absolutt. Tilpassede vurderinger er satt opp basert på stillingsbeskrivelsen din, og vil inneholde spørsmål om alle må-ha ferdigheter du spesifiserer.

Har du noen anti-juksende eller proktoreringsfunksjoner på plass?

Vi har følgende anti-juksede funksjoner på plass:

Ikke-googlable spørsmål
IP Proctoring
Nettproctoring
Webcam Proctoring
Deteksjon av plagiering
Sikker nettleser

Les mer om Proctoring -funksjonene.

Hvordan tolker jeg testresultater?

Den viktigste tingen å huske på er at en vurdering er et eliminasjonsverktøy, ikke et seleksjonsverktøy. En ferdighetsvurdering er optimalisert for å hjelpe deg med å eliminere kandidater som ikke er teknisk kvalifisert for rollen, det er ikke optimalisert for å hjelpe deg med å finne den beste kandidaten for rollen. Så den ideelle måten å bruke en vurdering på er å bestemme en terskelpoeng (vanligvis 55%, vi hjelper deg med å benchmark) og invitere alle kandidater som scorer over terskelen for de neste rundene med intervjuet.

Hvilken opplevelsesnivå kan jeg bruke denne testen til?

Hver ADAFACE -vurdering er tilpasset din stillingsbeskrivelse/ ideell kandidatperson (våre fageksperter vil velge de riktige spørsmålene for din vurdering fra vårt bibliotek med 10000+ spørsmål). Denne vurderingen kan tilpasses for ethvert opplevelsesnivå.

Får hver kandidat de samme spørsmålene?

Ja, det gjør det mye lettere for deg å sammenligne kandidater. Alternativer for MCQ -spørsmål og rekkefølgen på spørsmål er randomisert. Vi har anti-juksing/proctoring funksjoner på plass. I vår bedriftsplan har vi også muligheten til å lage flere versjoner av den samme vurderingen med spørsmål med lignende vanskelighetsnivåer.